Shematic.net

Bascule Barrier DoorHan FAAC 610 MPS - 615 SDT

Схемы >> Circuits in Practical Use >> Bascule Barrier DoorHan FAAC 610 MPS - 615 SDT

---

Bascule Barrier DoorHan FAAC 610 MPS - 615 SDT

Pic. 1. Bascule Barrier DoorHan FAAC 610 MPS - 615 SDT Circuit.
(Click to enlarge the Circuit)

Pic. 2. TX Desks Coding.

Pic. 3. Operation Modes of Bascule Barrier DoorHan FAAC 610 MPS - 615 SDT.

Programming:

1. Switch in the Power.
2. TX Desk is used for Code Record in Plate.
3. Use same TX Desk for Coding other TX Desks.
4. Codes of the coded TX Desks are saved in the Circuit Board of Decoder.

Device Coding:

1. At the same time Press the keys P1 and P2 on master TX Desk. Indicator starts to blink (after 1-2 seconds)
2. Press the Programming Key of Receiver. Indicator starts to blink.
3. During Blinking of master Transmitter Indicator press Desks Key.
4. Before press out Desks Key make sure that Indicator was light all the time.
5. Press out the Key of master TX Desk.

TX Desks Coding:

1. At the same time Press the keys P1 and P2 on master TX Desk. Indicator starts to blink (after 1-2 seconds)
2. Disposed master TX Desk before Coding Desk (master or slave). Pic. 2.
3. Press the Coding Key in master TX Desk during Blinking of master TX Desk Indicator.
4. Join the Channel on Programmable Desk when the Indicator Switch off after Double Blink.
5. Press out the Key of master TX Desk.

Repeat operation for all Unencoded Desks. Pic.3 – Operation Modes of Device.

added 23.07.07 19:12:31 | looked over 11630 times